Configure Ospfv3 Delete Virtual-Link - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

OSPFv3 Commands

configure ospfv3 delete virtual-link

configure ospfv3 {domain <domainName>} delete virtual-link {routerid}

<router-identifier> {area} <area-identifier>

Deletes a virtual link connected to another ABR.

Syntax Description

router-identifier

area-identifier

Usage Guidelines

A virtual link provides a logical path between the ABR of the disconnected area and the ABR of the

normal area that connects to the backbone. A virtual link must be established between two ABRs that

have a common area, with one ABR connected to the backbone. Specify the following:

router-identifier—Far-end router identifier, a four-byte, dotted decimal number.

area-identifier—Transit area used for connecting the two end-points. The transit area cannot have the

area identifier 0.0.0.0. and cannot be a stub area or an NSSA.

The following command deletes a virtual link with router ID 10.1.2.1 through the transit area 10.1.0.0:

configure ospfv3 delete virtual-link 10.1.2.1 10.1.0.0

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on platforms with a Core or an Advanced Core license.

Specifies an OSPFv3 domain. OSPF-Default is the only one currently

Specifies the router ID of the other end of the link.

Specifies the transit area identifier, a four-byte, dotted decimal number.

ExtremeWare XOS 11.3 Command Reference

Extremeware xos 11.3