Configure Ospfv3 Area Delete Range - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ospfv3 area delete range

configure ospfv3 {domain <domainName>} area <area-identifier> delete range
<ipv6netmask>
Description
Removes a range of IP addresses in an OSPFv3 area to be aggregated.
Syntax Description
domainName
area-identifier
ipv6netmask
Default
No OSPFv3 inter-area-prefix LSAs are configured.
Usage Guidelines
If you attempt to delete a range that was not configured, you will receive an error message.
Example
The following command is used to delete a summary network from area 0.0.0.1:
configure ospfv3 area 0.0.0.1 delete range 2aaa:
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
ExtremeWare XOS 11.3 Command Reference
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
Specifies an IPv6 address / prefix length.
configure ospfv3 area delete range
456:3ffe::/64
1361