Configure Ospfv3 Delete Interface - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ospfv3 delete interface

configure ospfv3 {domain <domainName>} delete [vlan <vlan-name> | tunnel
<tunnel-name> | [vlan | tunnel] all]
Description
Disables OSPFv3 on one or all VLANs or tunnels (router interfaces).
Syntax Description
domainName
vlan-name
tunnel-name
all
Default
N/A.
Usage Guidelines
None.
Example
The following command disables OSPFv3 on VLAN accounting:
configure ospfv3 delete vlan accounting
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
ExtremeWare XOS 11.3 Command Reference
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies all VLANs, or tunnels.
configure ospfv3 delete interface
1371