OSPF Commands
configure ospf area normal
configure ospf area <area-identifier> normal
Description
Configures an OSFP area as a normal area.
Syntax Description
area-identifier
Default
Normal.
Usage Guidelines
A normal area is an area that is not any of the following:
Stub area
●
NSSA
●
Virtual links can be configured through normal areas. External routes can be distributed into normal
areas.
Example
The following command configures an OSPF area as a normal area:
configure ospf area 10.1.0.0 normal
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1296
Specifies an OSPF area.
ExtremeWare XOS 11.3 Command Reference