IPv6 Unicast Commands
delete tunnel
delete tunnel <tunnel_name>
Description
Deletes an IPv6 tunnel.
Syntax Description
tunnel_name
Specifies an IPv6 tunnel.
Default
N/A.
Usage Guidelines
This command will destroy a previously created tunnel. The command acts on either a 6to4 or a 6in4
tunnel. Because the interface will be removed, all routes pointing out that interface will also be purged
from the system at the time.
Example
The following command deletes the tunnel link39:
delete tunnel link39
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1192
ExtremeWare XOS 11.3 Command Reference