Delete Ospfv3 Area - Extreme Networks ExtremeWare XOS Command Reference Manual

delete ospfv3 area

delete ospfv3 {domain <domainName>} area [<area-identifier> | all]
Description
Deletes an OSPFv3 area or all OSPFv3 areas.
Syntax Description
domainName
area-identifier
all
Default
N/A.
Usage Guidelines
An OSPFv3 area cannot be deleted if it has an associated interface. Also, area 0.0.0.0 cannot be deleted.
Example
The following command deletes an OSPFv3 area:
delete ospfv3 area 1.2.3.4
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
ExtremeWare XOS 11.3 Command Reference
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
Specifies all areas.
delete ospfv3 area
1387