Unconfigure Ripng - Extreme Networks ExtremeWare XOS Command Reference Manual

RIPng Commands

unconfigure ripng

unconfigure ripng {vlan <vlan-name> | tunnel <tunnel-name> | vlan all |
tunnel all}
Description
Resets RIPng parameters to the default value.
Syntax Description
vlan-name
tunnel-name
all
Default
N/A.
Usage Guidelines
Issuing the command
defaults, and disables RIPng, as that is the default.
Example
The following command resets the RIPng configuration to the default for the VLAN finance:
unconfigure rip finance
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1280
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies either all IPv6 configured VLANs or all IPv6 tunnels.
resets all the interfaces and the global configuration to the
unconfigure ripng
ExtremeWare XOS 11.3 Command Reference