Configure Rip Vlan Txmode - Extreme Networks ExtremeWare XOS Command Reference Manual

configure rip vlan txmode

configure rip [vlan <vlan-name> | all] txmode [none | v1only | v1comp |
v2only]
Description
Changes the RIP transmission mode for one or all VLANs.
Syntax Description
none
v1only
v1comp
v2only
vlan-name
all
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the transmit mode for the VLAN finance to transmit version 2
format packets to the broadcast address:
configure rip finance txmode v1comp
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies to not transmit any packets on this interface.
Specifies to transmit RIP version 1 format packets to the broadcast address.
Specifies to transmit RIP version 2 format packets to the broadcast address.
Specifies to transmit RIP version 2 format packets to the RIP multicast
address.
Specifies to apply settings to a specific VLAN name.
Specifies all VLANs.
configure rip vlan txmode
1217