Enable Rip Originate-Default Cost - Extreme Networks ExtremeWare XOS Command Reference Manual

enable rip originate-default cost

enable rip originate-default {always} cost <number> {tag<number>}
Description
Configures a default route to be advertised by RIP.
Syntax Description
always
cost <number>
tag <number>
Default
Disabled.
Usage Guidelines
If is specified, RIP always advertises the default route to its neighbors. If always is not specified,
always
RIP advertises a default route only if a reachable default route is in the system route table.
The default route advertisement is filtered using the out policy.
The cost metric is inserted for all RIP-learned, static, and direct routes injected into RIP. The tag value is
used only by special routing applications.
Example
The following command configures a default route to be advertised by RIP if there is a default route in
the system routing table:
enable rip originate-default cost 7
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies to always advertise the default route.
Specifies a cost metric. The range is 1 - 15.
Specifies a tag number.
enable rip originate-default cost
1235