Configure Iparp Add - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Unicast Commands

configure iparp add

configure iparp add <ip_addr> {vr <vr_name>} <mac>
Description
Adds a permanent entry to the ARP table. Specify the IP address and MAC address of the entry.
Syntax Description
ip_addr
mac
vr_name
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
Add a permanent IP ARP entry to the system. The
to locate a suitable interface.
Example
The following command adds a permanent IP ARP entry to the switch for IP address 10.1.2.5:
configure iparp add 10.1.2.5 00:11:22:33:44:55
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1074
Specifies an IP address.
Specifies a MAC address.
Specifies a VR name.
ip_address
is used to match the IP interface address
ExtremeWare XOS 11.3 Command Reference