Configure Vrrp Vlan Vrid Add Track-Ping - Extreme Networks ExtremeWare XOS Command Reference Manual

VRRP Commands

configure vrrp vlan vrid add track-ping

configure vrrp vlan <vlan_name> vrid <vridval> add track-ping <ipaddress>
frequency <seconds> miss <misses>
Description
Creates a tracking entry for the specified IP address. The entry is tracked via pings to the IP address,
sent at the specified frequency.
Syntax Description
vlan_name
vridval
ipaddress
seconds
misses
Default
N/A.
Usage Guidelines
Adding an entry with the same IP address as an existing entry will cause the new values to overwrite
the existing entry's frequency and miss number.
Example
The following command enables ping tracking for the external gateway at 3.1.0.1, pinging every 3
seconds, and considering the gateway to be unreachable if no response is received to 5 consecutive
pings:
configure vrrp vlan vlan-1 vrid 1 add track-ping 3.1.0.1 frequency 3 miss 5
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1046
Specifies the name of a VRRP VLAN.
Specifies the VRRP virtual router ID of the target virtual router. Value can be
in the range of 1-255.
Specifies the IP address to be tracked.
Specifies the number of seconds between pings to the target IP address.
Specifies the number of misses allowed before this entry is considered to be
failing.
ExtremeWare XOS 11.3 Command Reference