OSPFv3 Commands
show ospfv3 neighbor
show ospfv3 {domain <domainName>} neighbor {routerid <ip-address>} {vlan
<vlan-name> | tunnel <tunnel-name>} {detail}
Description
Displays information about an OSPFv3 neighbor.
Syntax Description
domainName
ip-address
vlan-name
tunnel-name
detail
Default
If no argument is specified, all OSPFv3 neighbors are displayed.
Usage Guidelines
None.
Example
The following command displays information about the OSPFv3 neighbors on the VLAN accounting:
show ospfv3 neighbor vlan accounting
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1404
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies a neighbor router ID.
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies detail information.
ExtremeWare XOS 11.3 Command Reference