Create Ospfv3 Area - Extreme Networks ExtremeWare XOS Command Reference Manual

OSPFv3 Commands

create ospfv3 area

create ospfv3 {domain <domainName>} area <area-identifier>
Description
Creates an OSPFv3 area.
Syntax Description
domainName
area-identifier
Default
Area 0.0.0.0
Usage Guidelines
Area 0.0.0.0 does not need to be created. It exists by default.
Example
The following command creates a non-backbone OSPFv3 area:
create ospfv3 area 1.2.3.4
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1386
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
ExtremeWare XOS 11.3 Command Reference