Configure Vlan Router-Discovery Hop-Limit - Extreme Networks ExtremeWare XOS Command Reference Manual

configure vlan router-discovery hop-limit

configure vlan <vlan_name> router-discovery {ipv6} hop-limit
<currenthoplimit>
Description
Configures the current hop limit value sent in router discovery advertisements on the VLAN.
Syntax Description
vlan_name
currenthoplimit
Default
64
Usage Guidelines
Configures the current hop limit value to be included in the router advertisement messages. Hosts then
use the current hop limit when they send packets.
A value of 0 means unspecified by this router. The default value is 64. The maximum value is 255.
Example
The following command configures the current hop limit to be 32 for the VLAN top_floor:
configure vlan top_floor router-discovery hop-limit 32
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies an IPv6 configured VLAN.
Specifies the current hop limit. Range is 0 to 255.
configure vlan router-discovery hop-limit
1179