Configure Rip Updatetime - Extreme Networks ExtremeWare XOS Command Reference Manual

RIP Commands

configure rip updatetime

configure rip updatetime <seconds>
Description
Specifies the time interval in seconds within which RIP sends update packets.
Syntax Description
seconds Specifies a time in seconds. The range is 10 to 180.
Default
30 seconds.
Usage Guidelines
The router exchanges an update message with each neighbor every 30 seconds (default value), or if
there is a change to the overall routed topology (also called triggered updates). The timer granularity is 10
seconds. Timer minimum is 10 seconds and maximum is 180 seconds.
Example
The following command sets the update timer to 60 seconds:
configure rip updatetime 60
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1218
ExtremeWare XOS 11.3 Command Reference