Configure Bgp Peer-Group Route-Policy - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

configure bgp peer-group route-policy

configure bgp peer-group <peer-group-name> route-policy [in | out] [none |
<policy>]
Description
Configures the policy for a peer group and all the neighbors of the peer group.
Syntax Description
peer-group-name
in
out
none
policy
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the route policy for the peer group outer and its neighbors using the
policy nosales:
configure bgp peer-group outer route-policy in nosales
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1464
Specifies a peer group.
Specifies to install the policy on the input side.
Specifies to install the policy on the output side.
Specifies to remove the filter.
Specifies a policy.
ExtremeWare XOS 11.3 Command Reference