Enable Ripng Splithorizon - Extreme Networks ExtremeWare XOS Command Reference Manual

RIPng Commands

enable ripng splithorizon

enable ripng splithorizon {vlan <vlan-name> | tunnel <tunnel_name> | [vlan
| tunnel] all}
Description
Enables the split horizon algorithm for RIPng.
Syntax Description
vlan-name
tunnel-name
all
Default
Enabled.
Usage Guidelines
Split horizon is a scheme for avoiding problems caused by including routes in updates sent to the
router from which the route was learned. Split horizon omits routes learned from a neighbor in updates
sent to that neighbor.
Example
The following command enables the split horizon algorithm for RIPng on all IPv6 configured interfaces:
enable ripng splithorizon
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1272
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies all interfaces.
ExtremeWare XOS 11.3 Command Reference