RIPng Commands
disable ripng poisonreverse
disable ripng poisonreverse {vlan <vlan-name> | tunnel <tunnel_name> |
[vlan | tunnel] all}
Description
Disables poison reverse algorithm for RIPng.
Syntax Description
vlan-name
tunnel-name
all
Default
Enabled.
Usage Guidelines
Like split horizon, poison reverse is a scheme for eliminating the possibility of loops in the routed
topology. In this case, a router advertises a route over the same interface that supplied the route, but the
route uses a hop count of 16, defining it as unreachable.
Example
The following command disables the split horizon with poison reverse algorithm for RIPng:
disable ripng poisonreverse
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1264
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies all interfaces.
ExtremeWare XOS 11.3 Command Reference