Show Ipstats - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Unicast Commands

show ipstats

show ipstats {ipv4} {vlan <name> | vr <vrname>}
Description
Displays IP statistics for the CPU for the switch or for a particular VLAN.
Syntax Description
name
vrname
Default
N/A.
Usage Guidelines
This command only shows statistics of the CPU-handled packets. Not all packets are handled by the
CPU.
If you do not specify a virtual router, the command applies to the current virtual router.
The fields displayed in the
Table 24: Global IP statistics field definitions
Field
InReceives
InUnicast
InBcast
InMcast
InHdrEr
Bad vers
Bad chksum
Short pkt
Short hdr
Bad hdrlen
Bad length
InDelivers
Bad Proto
OutRequest
OutDiscard
OutNoRoute
1150
Specifies a VLAN name.
Specifies a virtual router.
command are defined in
show ipstats
Definition
Total number of incoming IP packets processed by the CPU.
Total number of unicast IP packets processed by the CPU.
Total number of broadcast IP packets processed by the CPU.
Total number of multicast IP packets processed by the CPU.
Total number of packets with an IP Header Error forwarded to the CPU.
Total number of packets with a version other than IP v4 in the IP version field.
Total number of packets with a bad IP checksum forwarded to the CPU.
IP packets that are too short.
IP packets with a header that is too short.
IP packets with a header length that is less than the length specified.
IP packets with a length less than that of the header.
IP packets passed to upper layer protocols.
IP packets with unknown (not standard) upper layer protocol.
IP packets sent from upper layers to the IP stack.
IP packets that are discarded due to lack of buffer space or the router interface being
down, or broadcast packets with broadcast forwarding disabled.
IP packets with no route to the destination.
Table 24 though Table 27.
ExtremeWare XOS 11.3 Command Reference