Configure Bgp Cluster-Id - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

configure bgp cluster-id

configure bgp cluster-id <cluster-id>
Description
Configures the local cluster ID.
Syntax Description
cluster-id
Default
N/A.
Usage Guidelines
Used when multiple route reflectors are used within the same cluster of clients.
Extreme Networks recommends disabling BGP before configuring the cluster ID.
Example
The following command appends a BGP route reflector cluster ID to the cluster list of a route:
configure bgp cluster-id 40000
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1420
Specifies a 4 byte field used by a route reflector to recognize updates from
other route reflectors in the same cluster. The range is 0 - 4294967295.
ExtremeWare XOS 11.3 Command Reference