Configure Ospfv3 Interface Area - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ospfv3 interface area

configure ospfv3 {domain <domainName>} [vlan <vlan-name> | tunnel <tunnel-
name>] area <area-identifier>
Description
Moves an interface from one OSPFv3 area to another.
Syntax Description
domainName
vlan-name
tunnel-name
area-identifier
Default
Area 0.0.0.0
Usage Guidelines
Use this command to move an already configured interface from one area to another. The instance ID
associated with the interface will be unchanged.
Example
The following command moves the VLAN accounting to the OSPFv3 area 0.0.0.6:
configure ospfv3 vlan accounting area 0.0.0.6
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
ExtremeWare XOS 11.3 Command Reference
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
configure ospfv3 interface area
1375