Create Bgp Peer-Group - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

create bgp peer-group

create bgp peer-group <peer-group-name>
Description
Creates a new peer group.
Syntax Description
peer-group-name
Default
N/A.
Usage Guidelines
You can use BGP peer groups to group together up to 512 BGP neighbors. All neighbors within the peer
group inherit the parameters of the BGP peer group. The following mandatory parameters are shared
by all neighbors in a peer group:
remote AS
●
source-interface
●
out-route-policy
●
send-community
●
next-hop-self
●
Each BGP peer group is assigned a unique name when the peer group is created.
Example
The following command creates a new peer group named external:
create bgp peer-group outer
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1476
Specifies a peer group.
ExtremeWare XOS 11.3 Command Reference