Configure Access-List Delete - Extreme Networks ExtremeWare XOS Command Reference Manual

configure access-list delete

configure access-list delete <ruleName> [all | any | ports <portlist> |
vlan <vlanname>] {ingress | egress}
Description
Removes a dynamic ACL rule from the specified interface.
Syntax Description
ruleName
all
any
portlist
vlanname
ingress
egress
Default
The default direction is ingress.
Usage Guidelines
Specifying the keyword
all
Example
The following command removes the dynamic ACL icmp-echo from the port 1:2:
configure access-list delete icmp-echo ports 1:2
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms. The egress option is available on BlackDiamond 10K
switches only.
ExtremeWare XOS 11.3 Command Reference
Specifies a dynamic ACL rule.
Delete this ACL from all interfaces.
Delete this ACL as the wildcard ACL.
Specifies the ports on which this ACL is deleted.
Specifies the VLAN on which this ACL is deleted.
Delete the ACL for packets entering the switch on this interface.
Delete the ACL for packets leaving the switch from this interface
(BlackDiamond 10K only).
removes the ACL from all interfaces it is used on.
configure access-list delete
665