enable rip
enable rip
Description
Enables RIP for the whole router.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
RIP has a number of limitations that can cause problems in large networks, including:
A limit of 15 hops between the source and destination networks
●
A large amount of bandwidth taken up by periodic broadcasts of the entire routing table
●
Slow convergence
●
Routing decisions based on hop count; no concept of link costs or delay
●
Flat networks; no concept of areas or boundaries
●
Example
The following command enables RIP for the whole router:
enable rip
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
enable rip
1231