VRRP Commands
configure vrrp vlan vrid delete ipaddress
configure vrrp vlan <vlan_name> vrid <vridval> delete <ipaddress>
Description
Deletes a virtual IP address from a specific VRRP virtual router.
Syntax Description
vlan_name
vridval
ipaddress
Usage Guidelines
The restrictions on this command are as follows:
If the priority of the VR is 255, the IP address to be added must be owned by the VLAN on which
●
the VR exists. If the priority is not 255, the IP address must not be owned by that VLAN.
When a VR is enabled, it must have at least one virtual IP address. When the VR is not enabled,
●
there are no restrictions on deleting the IP address.
Example
The following command removes IP address 10.1.2.3 from VLAN vlan-1:
configure vrrp vlan vlan-1 vrid 1 delete 10.1.2.3
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1050
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of 1-
255.
Specifies the IP address of the virtual router in which this device participates.
ExtremeWare XOS 11.3 Command Reference