disable ripng splithorizon
disable ripng splithorizon {vlan <vlan-name> | tunnel <tunnel_name> | [vlan
| tunnel] all}
Description
Disables the split horizon algorithm for RIPng.
Syntax Description
vlan-name
tunnel-name
all
Default
Enabled.
Usage Guidelines
Split horizon is a scheme for avoiding problems caused by including routes in updates sent to the
router from which the route was learned. Split horizon omits routes learned from a neighbor in updates
sent to that neighbor.
Example
The following command disables the split horizon algorithm for RIPng:
disable rip splithorizon
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies all interfaces.
disable ripng splithorizon
1265