Rtlookup - Extreme Networks ExtremeWare XOS Command Reference Manual

rtlookup

rtlookup [<ipaddress> | <ipv6address>]{vr <vrname>}
Description
Performs a look-up in the route table to determine the best route to reach an IP address or host.
Syntax Description
ipaddress
ipv6address
vrname
Default
N/A.
Usage Guidelines
None.
Example
The following command performs a look up in the route table to determine the best way to reach the
specified IP address:
rtlookup 3aaa:5643::ef80:2525:1023:5213
History
This command was first available in ExtremeWare XOS 10.1.
The xhostname option was removed in ExtremeWare XOS 11.0.
Support for IPv6 was added in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies an IPv4 address.
Specifies an IPv6 address.
Specifies the virtual router to route from.
rtlookup
1197