Configure Bgp Peer-Group Source-Interface - Extreme Networks ExtremeWare XOS Command Reference Manual

configure bgp peer-group source-interface

configure bgp peer-group <peer-group-name> source-interface [any |
ipaddress <ipAddr>]
Description
Configures the source interface for a peer group and all the neighbors of the peer group.
Syntax Description
peer-group-name
any
ipAddr
Default
N/A.
Usage Guidelines
The source interface IP address must be a valid IP address of a VLAN configured on the switch.
Changes made to the parameters of a peer group are applied to all neighbors in the peer group.
Modifying the following parameters automatically disables and enables the neighbors before changes
take effect:
remote-as
●
timer
●
source-interface
●
soft-in-reset
●
password
●
Example
The following command configures the source interface for the peer group outer and its neighbors on
10.34.25.10:
configure bgp peer-group outer source-interface ipaddress 10.34.25.10
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
ExtremeWare XOS 11.3 Command Reference
Specifies a peer group.
Specifies any source interface.
Specifies an interface.
configure bgp peer-group source-interface
1467