Enable Udp-Echo-Server - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Unicast Commands

enable udp-echo-server

enable udp-echo-server {vr <vrid>}{udp-port <port>}
Description
Enables UDP echo server support.
Syntax Description
port
vr
Default
Disabled.
Usage Guidelines
UDP Echo packets are used to measure the transit time for data between the transmitting and receiving
end.
Example
The following command enables UDP echo server support:
enable udp-echo-server
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
1140
Specifies the UDP port.
Specifies the virtual router.
ExtremeWare XOS 11.3 Command Reference