Show Ospfv3 Interfaces - Extreme Networks ExtremeWare XOS Command Reference Manual

show ospfv3 interfaces

show ospfv3 {domain <domainName>} interfaces {vlan <vlan-name> | tunnel
<tunnel-name> | area <area-identifier> | detail}
Description
Displays information about one or all OSPFv3 interfaces.
Syntax Description
domainName
vlan-name
tunnel-name
area-identifier
detail
Default
If no argument is specified, all OSPFv3 interfaces are displayed.
Usage Guidelines
None.
Example
The following command shows a summary of the OSPFv3 interfaces:
show ospfv3 interfaces
The following is sample output from the command:
VLAN/Tunnel IPv6 Address
Neighbors
ixia 4:5:6:7::1/64
to-jmpr 111:222:333::7/48
to-Zebra 3ffe:506::4/48
to5 234:567::7/48
to65 10:203:134:7::7/48
Flags : (f) Interface Forwarding Enabled, (i) Interface OSPF Enabled,
(p) Passive Interface, (r) Router OSPF Enable.
ExtremeWare XOS 11.3 Command Reference
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
Specifies to display the information in detailed format.
AREA ID
2.0.0.0
5.0.0.0
0.0.0.0
3.0.0.0
1.0.0.0
show ospfv3 interfaces
Flags Cost State
-rif 5/A DR
-rif 5/A BDR
-rif 5/A BDR
-rif 5/A BDR
-rif 5/A BDR
1
1
1
1
1
1397