VRRP Commands
enable vrrp vrid
enable vrrp {vlan <vlan_name> vrid <vridval>}
Description
Enables a specific VRRP virtual router or all VRRP virtual routers on the switch.
Syntax Description
vlan_name
vridval
Default
N/A.
Usage Guidelines
This enables a specific virtual router on the device. If you do not specify a VRRP virtual router, all
VRRP virtual routers on this device are enabled.
Example
The following command enables all VRRP virtual routers on the switch:
enable vrrp
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1060
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of 1-
255.
ExtremeWare XOS 11.3 Command Reference