Configure Ripng Add - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ripng add

configure ripng add [vlan <vlan-name> | tunnel <tunnel-name>
| [vlan | tunnel] all]
Description
Configures RIPng on an IP interface.
Syntax Description
vlan-name
tunnel-name
all
Default
N/A.
Usage Guidelines
For RIPng to be active on the interface, it must also be globally enabled using the command
. If the keyword
ripng all
RIPng.
Example
The following command configures RIPng on the VLAN finance:
configure ripng add finance
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies all IPv6 configured VLANs or tunnels.
is specified, all IPv6 configured VLANs or tunnels will be configured for
configure ripng add
enable
1249