Enable Ospf Originate-Default - Extreme Networks ExtremeWare XOS Command Reference Manual

enable ospf originate-default

enable ospf originate-default {always} cost <cost> type [ase-type-1 | ase-
type-2] {tag <number>}
Description
Enables a default external LSA to be generated by OSPF, if no other default route is originated by OSPF
by way of RIP and static route re-distribution.
Syntax Description
always
cost
ase-type-1
ase-type-2
number
Default
N/A.
Usage Guidelines
If always is specified, OSPF always advertises the default route. If always is not specified, OSPF adds
the default LSA if a reachable default route is in the route table.
Example
The following command generates a default external type-1 LSA:
enable ospf originate-default cost 1 ase-type-1 tag 0
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies for OSPF to always advertise the default route.
Specifies a cost metric.
Specifies AS-external type 1 routes.
Specifies AS-external type 2 routes.
Specifies a tag value.
enable ospf originate-default
1335