Enable Iparp Checking - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

enable iparp checking

Enables checking if the ARP Request source IP address is within the range of the local interface or

VLAN domain.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

The following command enables IP ARP checking:

enable iparp checking

This command was first available in ExtremeWare 6.2.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0