Configure Igmp Snooping Vlan Ports Add Static Group - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Multicast Commands

configure igmp snooping vlan ports add static group

configure igmp snooping {vlan} <vlanname> ports <portlist> add static
group <ip address>
Description
Configures VLAN ports to receive the traffic from a multicast group, even if no IGMP joins have been
received on the port.
Syntax Description
vlanname
portlist
ip address
Default
None.
Usage Guidelines
Use this command to forward a particular multicast group to VLAN ports. In effect, this command
emulates a host on the port that has joined the multicast group. As long as the port is configured with
the static entry, multicast traffic for that multicast group will be forwarded to that port.
This command is for IGMPv2 only.
The switch sends proxy IGMP messages in place of those generated by a real host. The proxy messages
use the VLAN IP address for source address of the messages. If the VLAN has no IP address assigned,
the proxy IGMP message will use 0.0.0.0 as the source IP address.
The multicast group should be in the class-D multicast address space, but should not be in the multicast
control subnet range (224.0.0.x/24).
If the ports also have an IGMP filter configured, the filter entries take precedence. IGMP filters are
configured using the command:
configure igmp snooping vlan <vlan name> ports <portlist> filter <policy file>
Example
The following command configures a static IGMP entry so the multicast group 224.34.15.37 will be
forwarded to VLAN marketing on ports 2:1-2:4:
configure igmp snooping marketing ports 2:1-2:4 add static group 224.34.15.37
1536
Specifies a VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, it can be
a list of slots and ports. On a stand-alone switch, it can be one or more port
numbers. In the form 1, 2, 3-5, 2:5, 2:6-2:8.
Specifies the multicast group IP address.
ExtremeWare XOS 11.3 Command Reference