Show Ospfv3 Area - Extreme Networks ExtremeWare XOS Command Reference Manual

show ospfv3 area

show ospfv3 {domain <domainName>} area {<area-identifier> | detail}
Description
Displays information about OSPFv3 areas.
Syntax Description
domainName
area-identifier
detail
Default
N/A.
Usage Guidelines
None.
Example
The following command displays summary information about the OSPFv3 areas:
show ospfv3 area
The following is sample output:
AREA ID Type Summ
0.0.0.0 NORM ---- ------ 0
1.0.0.0 NORM ---- ------ 1
2.0.0.0 NORM ---- ------ 0
3.0.0.0 NORM ---- ------ 1
5.0.0.0 NORM ---- ------ 1
The following command displays information about OSPFv3 area 1.0.0.0:
show ospfv3 area 1.0.0.0
The following is sample output:
Area Identifier : 1.0.0.0
Router ID : 20.0.0.1
Spf Runs : 6
Num ASBRs : 1
Num Indication LSAs : 1
Num LSAs : 9
Num of Nbrs : 1
ExtremeWare XOS 11.3 Command Reference
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
Specifies to display the information in detailed format.
Def Num Num Num
Metric ABR ASBR Intf Runs LSAs
0 1
1 1
0 1
0 1
0 1
Type
Num of Interfaces
Num ABRs
Num DC-Bit LSAs
Num of DoNotAge LSAs: 1
LSA Chksum
Num of Virtual Nbrs : 0
SPF Num LSA
Checksum
7 7 0x3155b
6 9 0x4793d
5 10 0x47174
3 12 0x420cf
4 10 0x3b5b1
: NORM
: 1
: 1
: 1
: 0x4793d
show ospfv3 area
1395