Show Iparp - Extreme Networks ExtremeWare XOS Command Reference Manual

show iparp

show iparp {<ip_addr> | <mac> | vlan <vlan_name> | permanent} {vr
<vr_name>}
Description
Displays the IP Address Resolution Protocol (ARP) table. You can filter the display by IP address, MAC
address, VLAN, or permanent entries.
Syntax Description
ip_addr
mac
vlan_name
permanent
vr_name
Default
Show all entries, except for proxy entries.
Usage Guidelines
Displays the IP ARP table, including:
IP address
●
MAC address
●
Aging timer value
●
VLAN name, VLAN ID and port number
●
Flags
●
If you do not specify a virtual router, the command applies to the current virtual router.
The show output displays the following information:
Dynamic entries
Static entries
Pending entries
In Request
In Response
Out Request
Out Response
Failed requests
Proxy Answered
ExtremeWare XOS 11.3 Command Reference
Specifies an IP address.
Specifies a MAC address.
Specifies a VLAN name.
Specifies permanent entries.
Specifies a virtual router.
The number of dynamic (learned ARP) entries in the table.
The number of configured (static ARP) entries in the table.
The number of sent ARP requests that have not yet received a response.
The number of ARP request packets received (by this virtual router).
The number of ARP reply packets received (by this virtual router).
The number of ARP request packets sent (by this virtual router).
The number of ARP reply packets sent (by this virtual router).
The number of failed ARP requests sent (by this virtual router).
The number of ARP requests answered by the ARP proxy.
show iparp
1143