Configure Ospf Restart Grace-Period - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ospf restart grace-period

configure ospf restart grace-period <seconds>
Description
Configures the grace period sent out in Grace-LSAs and used by a restarting router.
Syntax Description
seconds
Default
The default is 120 seconds.
Usage Guidelines
This command configures the grace period sent out to helper neighbor routers and used by the
restarting router. The value of the grace period must be greater that the dead interval, and less than the
LSA refresh time.
Example
The following command configures a router to send LSAs with a 240 second grace period during
graceful OSPF restarts:
configure ospf restart grace-period 240
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Grace period, in seconds. The default value is 120 seconds. Range is 1 to
1800 seconds.
configure ospf restart grace-period
1311