Extreme Networks ExtremeWare XOS Command Reference Manual page 1398

OSPFv3 Commands
The following command displays information about the OSPFv3 interfaces on the VLAN to5:
show ospfv3 interfaces vlan to5
The following is sample output:
Interface
Router
RouterID
Passive
Priority
Hello Interval
Retransmit Interval : 5s
Interface ID
State
Hello due in
Total Num of Nbrs
Hellos Rxed
DB Description Rxed : 4
LSA Request Rxed
LSA Update Rxed
LSA Ack Rxed
In Discards
DR RtId
DR Interface addr
BDR Interface addr
Neighbors:
RtrId: 10.0.0.5
State: FULL
Options: 0x13 (-|R|-|-|E|V6)
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1398
: to5
: ENABLED
: 20.0.0.1
: No
: 1
: 10s
: 63
: BDR
: 3s
: 1
: 94
: 1
: 8
: 6
: 0
: 10.0.0.5
: fe80::280:c8ff:feb9:1cf1
: fe80::280:c8ff:feb9:2089
IpAddr: fe80::280:c8ff:feb9:1cf1
DR: 10.0.0.5 BDR: 20.0.0.1
Opaque LSA: No
Enabled : ENABLED
AreaID : 3.0.0.0
Link Type : broadcast
Cost : 40A
Transit Delay : 1s
Rtr Dead Time : 40s
Wait Timer : 40s
Instance ID : 0
Number of state chg : 2
Number of events : 3
Nbrs in FULL State : 1
Hellos Txed : 94
DB Description Txed : 3
LSA Request Txed : 1
LSA Update Txed : 7
LSA Ack Txed : 5
BDR RtId : 20.0.0.1
Pri: 1
Dead Time: 00:00:36
ExtremeWare XOS 11.3 Command Reference
Type: Auto