Create Ospf Area - Extreme Networks ExtremeWare XOS Command Reference Manual

create ospf area

create ospf area
create ospf area <area-identifier>
Description
Creates an OSPF area.
Syntax Description
area-identifier Specifies an OSPF area.
Default
Area 0.0.0.0
Usage Guidelines
Area 0.0.0.0 does not need to be created. It exists by default.
Example
The following command creates an OSPF area:
create ospf area 1.2.3.4
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1323
ExtremeWare XOS 11.3 Command Reference