clear counters vrrp
clear counters vrrp {{vlan <vlan_name>} {vrid <vridval>}}
Description
Clears, resets all VRRP statistics and counters.
Syntax Description
vlan_name
vridval
Default
N/A.
Usage Guidelines
Use this command to reset the VRRP statistics on the switch. Statistics are not reset when you disable
and re-enable VRRP.
If you do not enter a parameter, statistics for all VRRP VLANs are cleared.
If you specify only VLAN name, statistics for all VRRP VRIDs on that VLAN are cleared.
If you specify VLAN name and VRRP VRID, only statistics for that particular VRID are cleared.
Example
The following command clears the VRRP statistics on VRRP VLAN v1:
clear counters vrrp vlan v1
The following command clears the VRRP statistics for VRID 1 on VRRP VLAN v1:
clear counters vrrp vlan v1 vrid 1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of 1-
255.
clear counters vrrp
1043