Enable Ipforwarding Ipv6 - Extreme Networks ExtremeWare XOS Command Reference Manual

enable ipforwarding ipv6

enable ipforwarding ipv6 {vlan <vlan_name> | tunnel <tunnel-name> | vr
<vr_name>}
Description
Enables IP routing VLANs. If no argument is provided, enables IP routing for all VLANs and tunnels
that have been configured with an IPv6 address on the current virtual router.
Syntax Description
vlan_name
tunnel_name
vr_name
Default
Disabled.
Usage Guidelines
When new IPv6 interfaces are added, IP forwarding is disabled by default.
Other IP related configuration is not affected.
Example
The following command enables forwarding of IPv6 traffic for all VLANs in the current virtual router
context with IPv6 addresses:
enable ipforwarding ipv6
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies a virtual router.
enable ipforwarding ipv6
1195