configure ospfv3 add interface
NOTE
Configuration of the link-type parameter is not supported. OSPFv3 will always consider the link-type to be broadcast.
Example
The following command adds the VLAN accounting (enabling OSPFv3 on the interface), to the area
0.0.0.1 with an instance ID of 2:
configure ospfv3 add vlan accounting instance-id 2 area 0.0.0.1 link-type auto
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1355
ExtremeWare XOS 11.3 Command Reference