Configure Bgp Routerid - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

configure bgp routerid

configure bgp routerid <router identifier>
Description
Changes the router identifier.
Syntax Description
router identifier
Default
N/A.
Usage Guidelines
BGP must be disabled before changing the router ID.
BGP selects routes based on the following precedence (from highest to lowest):
higher weight
●
higher local preference
●
shortest length (shortest AS path)
●
lowest origin code
●
lowest MED
●
route from external peer
●
lowest cost to Next Hop
●
lowest router ID
●
Example
The following command changes the router ID:
configure bgp routerid 192.1.1.13
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1472
Specifies a router identifier in the IPv4 address format.
ExtremeWare XOS 11.3 Command Reference