RIPng Commands
disable ripng export
disable ripng export [direct | ospfv3 | ospfv3-extern1 | ospfv3-extern2 |
ospfv3-inter | ospfv3-intra | static]
Description
Disables RIPng from redistributing routes from other routing protocols.
Syntax Description
static
direct
ospfv3
ospfv3-intra
ospfv3-inter
ospfv3-extern1
ospfv3-extern2
Default
Disabled.
Usage Guidelines
This command disables the exporting of static, direct, and OSPF-learned routes from the switch routing
table into the RIPng domain.
Example
The following command disables RIPng from redistributing any routes learned from OSPFv3:
disable ripng export ospfv3
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1262
Specifies user configured static routes.
Specifies directly reachable subnets from the router (only interfaces that have
IP forwarding enabled are exported).
Specifies all OSPFv3 routes.
Specifies OSPFv3-intra area routes.
Specifies OSPFv3-inter area routes.
Specifies OSPFv3 external route type 1.
Specifies OSPFv3 external route type 2.
ExtremeWare XOS 11.3 Command Reference