Configure Ospf Vlan Neighbor Add - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ospf vlan neighbor add

configure ospf vlan <vlan-name> neighbor add <ip-address>
Description
Configures the IP address of a point-to-point neighbor.
Syntax Description
vlan-name
ip-address
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the IP address of a point-to-point neighbor:
configure ospf vlan accounting neighbor add 10.0.0.1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies a VLAN name.
Specifies an IP address.
configure ospf vlan neighbor add
1319