OSPFv3 Commands
clear ospfv3 counters
clear ospfv3 {domain <domainName>} counters
{ interfaces [[vlan | tunnel] all | vlan <vlan-name> |
tunnel <tunnel-name> | area <area-identifier>]
| area [all | <area-identifier>]
| virtual-link [all | {routerid} <router-identifier>
{area} <area-identifier>]
| neighbor [all | routerid <router-identifier> | vlan <vlan-name> |
tunnel <tunnel-name>]
| system
}
Description
Clears the OSPFv3 counters (statistics).
Syntax Description
domainName
all
vlan-name
tunnel-name
router-identifier
area-identifier
system
Default
N/A.
Usage Guidelines
The global command
equivalent of
This command can be used to clear various OSPFv3 counters (Interface, Area, Virtual-Link, System etc.).
The following is the list of various counters that would be reset to zero by this command:
Neighbor specific counters
●
Number of state changes
■
Number of events
■
Interface/VLAN/Virtual-link/Tunnel specific counters
●
Number of Hellos rxed
■
Number of Hellos txed
■
1352
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies all VLANs, tunnels, areas, neighbors, or virtual-links.
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies a router identifier, a four-byte, dotted decimal number.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
Specifies the OSPFv3 system/global counters.
clear counters
clear ospfv3 counters
also clears all OSPFv3 counters. This global command is the
for OSPFv3.
ExtremeWare XOS 11.3 Command Reference