Disable Ip-Option Loose-Source-Route - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Unicast Commands

disable ip-option loose-source-route

disable ip-option loose-source-route
Description
Disables processing of the loose source route IP option in the IPv4 packet header.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
Disables the switch from forwarding IP packets with the IP option for loose source routing turned on.
Packets with the loose source route option enabled will be dropped by the switch.
Example
The following command disables processing of the loose source route IP option:
disable ip-option loose-source-route
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1112
ExtremeWare XOS 11.3 Command Reference