Configure Vlan Router-Discovery Max-Interval - Extreme Networks ExtremeWare XOS Command Reference Manual

IPv6 Unicast Commands

configure vlan router-discovery max-interval

configure vlan <vlan_name> router-discovery {ipv6} max-interval
<maxinterval>
Description
Configures the maximum time between unsolicited router discovery advertisements on the VLAN.
Syntax Description
vlan_name
maxinterval
Default
600 seconds
Usage Guidelines
This command configures the maximum amount of time before an unsolicited router advertisement
message is advertised over the links corresponding to the VLAN.
Example
The following command configures the max-interval to be 300 seconds for the VLAN top_floor:
configure vlan top_floor router-discovery max-interval 300
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1182
Specifies an IPv6 configured VLAN.
Specifies the maximum time between advertisements, in seconds. Range is 4
to 1800
ExtremeWare XOS 11.3 Command Reference