Configure Ospfv3 Area Stub - Extreme Networks ExtremeWare XOS Command Reference Manual

OSPFv3 Commands

configure ospfv3 area stub

configure ospfv3 {domain <domainName>} area <area-identifier> stub [summary
| nosummary] stub-default-cost <cost>
Description
Configures an OSPFv3 area as a stub area.
Syntax Description
domainName
area-identifier
summary
nosummary
cost
Default
N/A.
Usage Guidelines
A stub area is connected to only one other area. The area that connects to a stub area can be the
backbone area. External route information is not distributed into stub areas. Stub areas are used to
reduce memory consumption requirements on OSPFv3 routers.
Example
The following command configures an OSPFv3 area as a stub area:
configure ospfv3 area 0.0.0.6 stub nosummary stub-default-cost 10
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1368
Specifies an OSPFv3 domain. OSPF-Default is the only one currently
supported.
Specifies an OSPFv3 area, a four-byte, dotted decimal number.
Specifies that inter-area LSAs can be propagated into the area.
Specifies that inter-area LSAs cannot be propagated into the area.
Specifies a cost metric.
ExtremeWare XOS 11.3 Command Reference